BookTitleMAGNET_GENERAL_CATALOG_2019

page
101/188

This page is an overview of MAGNET_GENERAL_CATALOG_2019 on page101
Move to the page after second(s).
Now go to the page by clicking "Open the e-Book" button.

MAGNET_GENERAL_CATALOG_2019

ReadBook

Open e-Book in Flash Viewer

This e-Book is not available in your environment.

Summary

MAGNET_GENERAL_CATALOG_2019

KRU-2DGS / HL-E / WKS / EMA / CEM / CEM-SRModel EMA WELDING JIG FOR ONE FACE WELDINGRectifier required additionallyEMA-□A[Application]Jigs developed for automatic welding of steel plates to hold steel plates and backing materials.These jigs can be used to hold cut-out pieces during EPM welding operations, to straightenworkpieces and to secure stacked steel plates during fusing of stacked steel plates.[Features]●Holding and releasing workpieces can be controlled electrically.●Workpieces are secured to a welding frame by a strong magnetic force and therefore warping ofsteel plates due to welding heat can be prevented.●Drip-proof construction for outdoor operations. Highly resistant to impact and heat.※The rectifier is of special specifications according to the number of magnets used.[mm(in)]MAGNETIC TOOLS & EQUIPMENTFOR WELDING OPERATIONLIFTINGMAGNETMountingpartHd 1〈A type〉〈C type〉φDbHMountingpartφDbd 1ModelEMA-25-AEMA-25-CEMA-26-AEMA-30-AEMA-30-CHolding Power Dimensions Power SourceWorkingSteel Plate Steel PlateD H d1 b Mounting hole Voltage Current Rate20mm thick 50mm thick20kN(2000kgf)21kN(2100kgf)25kN(2500kgf)24kN 245 100(2400kgf) (9.64)(3.93)290(11.4)150(5.90)3ーφ21(0.82)3ーM16(0.62)36kN 255 120 305 704ーφ26(1.02)(3600kgf) (10.0)(4.72)(12.0)(2.75)50kN 296 150(5000kgf) (11.6)(5.90)340(13.3)200(7.87)3ーφ23(0.90)3ーM20(0.78)200VDC1.0 A1.4 A1.75A100%EDMass30kg/66.1 lb40kg/88.1 lb65kg/143 lbMAGBORE*CHIP & SLUDGECONVEYANCE EQUIPMENTModel CEM ELECTROMAGNET FOR CHAMFERINGCEM-16ModelMax. HoldingPowerRectifier required additionallyPφDDimensionsφD h T H Pφd□WPT h[Application]Suitable for securing workpieces during light duty work such as chamfering.[Features]●The periphery or four faces of workpieces can be worked duringchamfering, for example, in one chuckingto improve work efficiency.●Damage to workpieces by mechanicalclamping can be prevented.Model CEM-SR ELECTROMAGNET WITH RECTIFIER FOR CHAMFERINGHRatedVoltageRatedCurrentWorkingRateMass[mm(in)]CEM-16 1000kgf 160(6.29) 64(2.51) 15(0.59) 79(3.11) 140(5.51) 14(0.55) 170(6.69) 0.4 A 100% Approx. 14 kg/30.8 lb90 VDCCEM-23 2000kgf 230(9.05) 76(2.99) 20(0.78) 96(3.77) 200(7.87) 22(0.86) 250(9.84) 0.7 A ED Approx. 28 kg/61.7 lb※Applicable rectifiers: RH-M102C/M105B/M205B/M210B.Rectifier added to electromagnetic CEM for chamfering!□W4-φdENVIRONMENTALEQUIPMENTMAGNETIZER ANDDEMAGNETIZERMAGNETIC EQUIPMENTFOR CONVEYANCEMAGNETICSEPARATORSPOWERFUL MAGNETICSEPARATORSCEM-23SRCable: 3 m170MAGNET ONOFFREVERSEFUSE(2A)544-φ6Cable: 2 mP□WMEASURINGTOOLSPφD4-φdMEASURINGINSTRUMENTS[Application]Suitable for securing workpieces during light duty work suchas chamfering.[Features]●The built-in compact rectifier eliminates a need of a powersource board, requiring simple wiring only.●The magnet specifications are all the same as Model CEM.ModelCEM-16SRCEM-23SRMax. HoldingPowerDimensionsφD h T H Pφd□WInput1000kgf160 64 15 79 140 14 170Singlephase,2000kgf(6.29)(2.51)(0.59)(3.11)(5.51)(0.55)(6.69) 230 76 20 96 200 22 250 100 VAC(9.05)(2.99)(0.78)(3.77)(7.87)(0.86)(9.84)PowerWorkingConsumptionRate41W72W100%EDhTH[mm(in)]Mass14kg/30.8 lb28kg/61.7 lbMAGNETICMATERIALSPrecautions for useThese holders cannot be used for work where heat is applied for long hours. If the magnet is subjected to high temperature,its magnetic force will drop or be lost suddenly, causing the workpiece to come off the attractive face. Exercise caution.94