BookTitleMAGNET_GENERAL_CATALOG_2019

Summary

MAGNET_GENERAL_CATALOG_2019

OFFModel HL HAND LIFMA*HL-15H6016.780120391010152OFFPL-40B140O N200HL-20AModel PL PERMANENT MAGNETIC LIFMA*dLB[Application]These Lifmas are suitable for transporting such raw materials as mill scale ironplates and flat iron products and lifting and transporting semi-finished productshaving flat surfaces such as machine parts, press dies and plastic molds.[Features]●These are of permanent magnetic type requiring no power source. Thus, thereis no risk of falling workpieces due to power failure or failure of wiring systems.●The employment of a cam system facilitates holding and releasing of workpieces.Precautions for useWhen you plan to use the Lifma for special steel materials such as hardened materials,please consult with us prior to purchasing the Lifma.The operation of the cam to hold and release workpieces exerts physical friction to theworkpieces. Therefore, the surfaces finished by polishing, for example, may be scratched.Do not use the Lifma for workpieces whose width or length is short and the cam operationdoes not work on them. Operate the ON/OFF select cam by a foot.110100■HoldingPlace the Lifma on aworkpiece to transport and pullthe lever upright.■ReleasingPut the lever in the horizontalposition to release the Lifmafrom the workpiece.[Application]Suitable for pulling out steel materials or steel plates and carrying metal frames, raw materials,press molds, semi-finished products, etc.[Features]●A new cam mechanism is employed so as not to apply friction due to holding and releasingdirectly to the surface of workpieces to transport. (HL-20A)●Workpieces are held and released quite smoothly.●The magnetic force can be turned on and off by lever operation. (HL-15)●The T-handle is robust and held by hand comfortably for stable workpiece transportation. (HL-15)OFF(Releasing)Holding[mm(in)]ModelMax. Holding Power LiftingDimensionsHandleLateral Lift Capacity Width Length Height LengthMassHL-15350N(35kgf) 1.5kN(150kgf) 20kg/44.1 lb 60(2.36)120(4.72) 52(2.04) 49(1.92) 3.0kg/6.6 lbHL-20A500N(50kgf) 2 kN(200kgf) 30kg/66.1 lb 100(3.93)140(5.51) 32(1.26) 200(7.87) 2.5kg/5.5 lb※The holding power is based on a test piece of 15 mm thick soft steel. The holding power and lifting capacity dropdepending on the thicknesses, materials of workpieces and other factors.※Do not use this Lifma for a hoist.050100(%)050100(%)SS400SS400▽▽▽GSUS430SS400▽▽S45CSS400▽S45C熱処理SS400~SKH2SKH2熱処理FC400FC200[mm(in)]ModelLifting CapacityDimensions Shackle“d”B L H(Lifting ring ID)MassPL-20B200kg/440lb122(4.80) 150(5.90) BC14(0.55)(φ40(1.57))255(10.0)8.5kg/18lbPL-40B400kg/881 lb212(8.34)181(7.12) BB20(0.78)(φ58(2.28)) 14.0kg/31lb※The lifting capacity is indicated by a quarter of the max. holding power.※The dimension“H”is up to the top end of the inside diameter of the shackle.■Steel plate lifting standard (Mill scale soft steel plate)[mm(in)]ThicknessModelPL-20BPL-40B5ー7□450(17.7)350(13.7)×550(21.6)□950(37.4)650(25.5)×1300(51.1)8ー12□500(19.6)350(13.7)×700(27.5)□1100(43.3) 750(29.5)×1500(59.1)13ー16□1000(39.4) 700(27.5)×1400(55.1)□550(21.6) 400(15.7)×700(27.5)17ー25□950(37.4) 650(25.5)×1300(51.1)26ー40□450(17.7)350(13.7)×550(21.6)□750(29.5)550(21.6)×1000(39.4)41ー65□350(13.7)250(9.84)×500(19.6)□600(23.6)450(17.7)×700(27.5)66ー100□250(9.84)200(7.87)×300(11.8)□500(19.6)350(13.7)×700(27.5)Model LM-P UP-DOWN TYPE PERMANENT MAGNETIC LIFMA*An exampleof usageLM-P1242An example of special fabricationON側OFF側L 1L□d2-3/8How touse(HL-20A)W1W4-M50ストローク[Application]Suitable for lifting and moving bent plates, floor plates, pressed workpieces having concaveor convex sections, iron doors of buildings, deck plates, guard rails, cans, etc.[Features]●The attraction is turned on and off by moving up and down the built-in magnet with anair cylinder, which facilitates remote operation and automated operation.●Compared with the electromagnetic type, this model has a larger holding power on thin sheets(less than 5 mm thick) and its capacity drops less when clearance is present. Accordingly,this model is most suitable for lifting pressed workpieces having concave or convex sections.●Energy saving type as no electric power source is required.●The ON state is maintained if the air source is shut down and therefore there is norisk of falling workpieces, thus enhancing safety.[mm(in)]H h■Change in holdingpower by platethickness andclearanceLB-PR / HL / PL / LM-PPlate thicknessDimensionsModelAir PressureMassW L H h W1 L1 d MLM-P1242 120(4.72)112(4.40) 93.5(3.68) 80(3.14) 370(14.5) 98(3.85) M12,(0.47)depth 14(0.55) Approx. 17kg/ 37 lb420(16.5)0.49 MPa or overLM-P2442 240(9.44) 119(4.69) 133(5.23) 150(5.90) 300(11.8) 142(5.59) M20,(0.78)depth 30(1.18) Approx. 38kg/ 83 lb※An air source, select valve and other air control equipment must be provided by the user.※This model is not suitable for thick workpieces and workpieces stacked closely. The specifications vary according to workpieces to lift. Please contact us to select the best design.↓Holding powerPL-40BPL-20B↓Holding powerPL-20BPL-40BClearance■Difference in holding■Difference in holding powerpower by materials by attractive face roughnessMAGNETIC TOOLS & EQUIPMENTFOR WELDING OPERATIONLIFTINGMAGNETMAGBORE*CHIP & SLUDGECONVEYANCE EQUIPMENTENVIRONMENTALEQUIPMENTMAGNETIZER ANDDEMAGNETIZERMAGNETIC EQUIPMENTFOR CONVEYANCEMAGNETICSEPARATORSPOWERFUL MAGNETICSEPARATORSMEASURINGTOOLSMEASURINGINSTRUMENTSMAGNETICMATERIALS100