BookTitleMAGNET_GENERAL_CATALOG_2019

Summary

MAGNET_GENERAL_CATALOG_2019

LIFTING MAGNETSMAGNETIC TOOLS & EQUIPMENTFOR WELDING OPERATIONLIFTINGMAGNETMAGBORE*Model LME BATTERY ACE*The Battery Ace is designed to lift and transport workpieces using a function equivalent to theelectromagnetic type with a built-in battery on indoor work sites where no power supply is available.This is useful as a lifting section of cranes and hoists for keeping steel plates and steel materials inorder or distributing materials and loading and unloading workpieces to and from machine tools.■Common specifications of the Battery Ace (standard type, automatic holding and releasing type): LME-F/FJ●The rigid body and guard acting as a grip also ensure high impact resistance anddurability in severe work conditions.●Since no power cord is needed, the Battery Ace can be used on various work sites.There is no fear of accidental release of workpieces in the event of power failure orfeeder cable breakage.●When the battery power becomes low, the warning buzzer will sound.●The electrical unit of all models is of non-contact type to reduce the rate ofoccurrence of failures due to wear of the relay.Working rate 50% ED (Power on 5 minutes and pause 5 minutes)●The battery operating time has been increased by 40% max. per day (whencompared with the old model).●When two or more workpieces are held, workpieces that are held in an unstablestate can be released by turning the cam switch from“ON”to“OFF”in the caseof LME-F or by pressing the [SEPARATE] button in the case of LME-FJ so thatthe remaining workpieces can be transported safely.●All models employ a construction to allow the battery to be removed from the back.●A removable rechargeable spare battery is included with all models as a standardaccessory. The Battery Ace can be used simply by connecting the connector.CHIP & SLUDGE ENVIRONMENTAL MAGNETIZER AND MAGNETIC EQUIPMENTCONVEYANCE EQUIPMENT EQUIPMENT DEMAGNETIZER FOR CONVEYANCEMAGNETICSEPARATORSPOWERFUL MAGNETICSEPARATORSMEASURING MEASURING MAGNETICTOOLS INSTRUMENTS MATERIALS107Size reduced 30% max.! Gap performance improved significantly by optimum design!Lifted objectautomaticholding/releasingtypeLME-30FJφdWH 1〈LME-F〉H H2StandardtypeLME-30FL 0tLFeatures of LME-F●A cam switch is used for easy ON/OFF operation.●A remote operation function is also available. (Optional)Two types selectable by functionsFeatures of LME-FJ●The auto/manual operation can be selected with the operationswitch. In the auto mode, an operation to repeat holding andreleasing workpieces can be automated to enable the work to beconducted without remote input. (Holding and releasing repeatedeach time the Battery Ace touches down on the floor.)●A proximity sensor mounted in the auto operation detecting sectionprevents malfunction in poor environment due to contamination,powder, etc. to ensure safe and reliable transportation.●The pushbutton switch on the operation panel enables manualoperation of lifted objects.A type equipped with an automatic function to control thenumber of sheets (Model LME-EMJ) is also available.φdW〈LME-FJ〉Battery removablefrom back!Easy change & quick start!■Cycle-service long-life battery ModelEB25 is available optionally. Change tothe cycle-service battery is possiblewithout voltage adjustment. This isrecommendable for users who use theBattery Ace very often.※The battery for LME-10F-A/10FJ-A isthe motorcycle battery.●For the purchase of batteries, pleasecontact us.Precaution for use●If an alarm is issued repeatedly,the life of the battery becomesshorter. Replace it with a chargedbattery at an early stage.●Rust and scratches on theattractive face affect the holdingpower adversely. Repair itperiodically.ModelLifting CapacityDimensionsBattery Working HoursBatteryMassW L L0 H H1 H2 d t Capacity (50%ED)ChargerLME-10F-A1000kg/2205 lb22044024 40 25300(11.8) 404(15.9) 90(3.54)(8.66) (17.3) (0.94)(1.57)(0.98) Approx. 60kg/ 132.3 lb InputMax. 8 hours 100 VACLME-17F-A1700kg/3748 lb263380(14.9)520469(18.4) 95(3.74)256040Approx. 130kg/ 286.6 lbOutputLME-30F-A3000kg/6614 lb(10.3)490(19.2) (20.4)12V 28Ah514(20.2)140(5.51) (0.98)(2.36)(1.57) Max. 7 hoursApprox. 180kg/1028.9 lb12 VDC※The lifting capacity is indicated by a value that is a half of the max. holding power.DimensionsBattery Working HoursBatteryModel Lifting CapacityMassW L L0 H(Touch down on floor-lifting) H1 H2 d t Capacity (50%ED)Charger22044016 40 25LME-10FJ-A 1000kg/2205 lb 300(11.8) 445(17.5)ー456(17.9) 90(3.54)(8.66) (17.3) (0.62)(1.57)(0.98) 12V 12Ah Approx. 65kg/ 143.3 lb InputMax. 8 hours 100 VACLME-17FJ-A 1700kg/3748 lb 263 380(14.9) 490 516(20.3)ー527(20.7) 95(3.74) 25 60 40Approx. 140kg/ 308.7 lb Output12V 28AhLME-30FJ-A 3000kg/6614 lb (10.3) 490(19.2) (19.2) 561(22.0)ー572(22.5)140(5.51) (0.98)(2.36)(1.57) Max. 7 hours Approx. 190kg/ 418.9 lb 12 VDC※The lifting capacity is indicated by a value that is a half of the max. holding power.H 1H H2L0tLAllmodels[mm(in)]AccessoriesCharger:1setSpare battery:1set[mm(in)]AccessoriesCharger:1setSpare battery:1set