BookTitleMAGNET_GENERAL_CATALOG_2019

Summary

MAGNET_GENERAL_CATALOG_2019

LME-V / LME-M / LME-TModel LME-M BATTERY ACE*Controlled numberof plates to lift[Application]This Battery Ace allows the magnetic force to be adjusted. Suitablefor lifting one plate from stacked plates.[Features]●”ON”(forward) (weak),“OFF”and“REV”(reverse) can be selectedeasily with a switch.●The magnetic force can be adjusted steplessly by while holdingthe WEAK pushbutton switch pressed, turning the magnetic forceadjust knob.●When the pushbutton switch is released after adjusting the numberof plates, the strong excitation is automatically activated.●All operations can also be performed remotely.Working rate 50% ED (Power on 5 minutes and pause 5 minutes)MAGNETIC TOOLS & EQUIPMENTFOR WELDING OPERATIONLIFTINGMAGNETMAGBORE*LME-60ELM-AModelLiftingDimensionsWorking HoursCapacityBatteryMassAttractive face Height Lifting ring ID(50%ED)LME-15FM-A 1500kg/ 3307 lb 280(11.0)×350(13.7) 464(18.2)100kg/220 lbφ60(2.36) 12V, 28AhLME-30FM-A 3000kg/ 6614 lb 280(11.0)×450(17.7) 521(20.5) Max. 8 hours 160kg/352 lb12V, 28AhLME-60ELM-A 6000kg/13227 lb 270(10.6)×900(35.4) 755(29.7)φ118(4.64) 300kg/661 lb2 units in series※The lifting capacity is indicated by a value that is a half of the max. holding power.Model LME-T BATTERY ACE*2-point liftingLME-20ETJ-APrecaution for useRust and scratches on the attractive face affect the holding poweradversely. Repair it periodically.BatteryChargerInput 100 VACOutput 12 VDCInput 100 VACOutput 24 VDCChargingTime10?15h6?10hAccessories[mm(in)]Remote operation switch(cable 3 m included)Spare battery: 1 setCharger: 1 set[Application]This Battery Ace, equipped with two swivel type magnets mounted on a beam at a1000 mm interval, can lift long steel plates. This Battery Ace can follow warping ofsteel plates to transport them safely. Especially, it works well on thin steel sheets.[Features]●Suitable for transporting thin steel sheets.●Capable of lifting steel sheets that are 30% to 100% longer than sheets lifted bythe standard type Battery Ace.Working rate 50% ED (Power on 5 minutes and pause 5 minutes)An example of fabricationCHIP & SLUDGECONVEYANCE EQUIPMENTENVIRONMENTALEQUIPMENTMAGNETIZER ANDDEMAGNETIZERMAGNETIC EQUIPMENTFOR CONVEYANCEMAGNETICSEPARATORSφ6059040POWERFUL MAGNETICSEPARATORS10001200155160(676)435544Working rate 50% ED (Power on 5 minutes and pause 5 minutes)Precaution for useRust and scratches on the attractive face affect the holding poweradversely. Repair it periodically.ModelLME-20ETJ-ALifting Capacity2000kg/ 4409 lbDimensionsBatteryAttractive face Height Lifting ring ID155(6.10)×435(17.1)2 units701(27.6)φ75(2.95)PlateThickness5? 9 2000(78.7)×2000(78.7)Square Rectangular Specified LengthWorking Hours(50%ED)1000(39.4)×1500(59.0)×3500(137.8) 2700(106.3)※The lifting capacity is indicated by a value that is a half of the max. holding power.※The number-of-workpiece control type, special specifications, is also available.1012142400(94.5)×2400(94.5)2500(98.4)×2500(98.4)2400(94.5)×2400(94.5)16?22 2200(86.6)×2200(86.6)25?32 2000(78.7)×2000(78.7)36?50 1500(59.0)×1500(59.0)1000(39.4)×4000(157.5)Mass12V28Ah Max. 8 hours 290kg/639 lb1500(59.0)×3500(137.8)1500(59.0)×4000(157.5)1500(59.0)×3500(137.8)1500(59.0)×3000(118.0)1000(39.4)×1500(59.0)×3500(137.8) 2500(98.4)1000(39.4)×2500(98.4)1500(59.0)×1500(59.0)Battery ChargerInput 100 VACOutput 12 VDC914(35.9)×1829(72.0)(Nominal 3×6)ChargingTime10 ?15h1219(47.9)×2438(95.9)(Nominal 4×8)Accessories[mm(in)]1524(60.0)×3048(12.0)(Nominal 5×10)[mm(in)]Spare battery: 1 setCharger: 1 setMEASURINGTOOLSMEASURINGINSTRUMENTSMAGNETICMATERIALSKeep in mind that the capacity of the Lifma varies largely depending on thethickness and material of workpieces, clearance and other factors.110