BookTitleMAGNET_GENERAL_CATALOG_2019

page
125/188

This page is an overview of MAGNET_GENERAL_CATALOG_2019 on page125
Move to the page after second(s).
Now go to the page by clicking "Open the e-Book" button.

MAGNET_GENERAL_CATALOG_2019

ReadBook

Open e-Book in Flash Viewer

This e-Book is not available in your environment.

Summary

MAGNET_GENERAL_CATALOG_2019

[Application]Widely used as a means to transfer chips produced from machining bymachine tools to a point of collection. If oil is sticking to chips, they canbe degreased by letting oil drop naturally when chips are being transferred.In particular, this model is suitable for transferring chips from gear cuttingmachines, end milling machines and milling machines.This model can also be used for continuous transfer of granular parts.[Features]■Superb durability and safetySimple construction and practically no maintenance required.Since the mechanically moving (rotating) parts are housed in the enclosedcylinder, there is no fear of accidents due to collision.■Economical functionsHigh processing capacity and high transfer efficiency.As chips are carried by the spiral slide movement, their movement causessticking oil to drop off effectively.There is no place where oil stays and therefore oil natural drop is ideal toimprove the efficiency of collection of liquid.■Low running costOnly a slight amount of power is required to drive the rotation. Most of thework is handled by the permanent magnets.※For other special lengths, please contact us. The length can beincreased in units of 100 mm.■The waterproof feature enables collection ofchips in liquid.※The motor is not waterproofed. Keep it away from water.An example of discharging chipsL3(Waterproofed part)GutterL3(Waterproofed part)GutterL3(Waterproofed part)GutterFMS / KSC-WMAGNETIC TOOLS & EQUIPMENTFOR WELDING OPERATIONLIFTINGMAGNETMAGBORE*CHIP & SLUDGECONVEYANCE EQUIPMENTENVIRONMENTALEQUIPMENT■Super Small Size SeriesModel Nominal Size■Small Size Series■Medium Size Series■Large Size Series〈Construction〉The spiral magnetic conveyor motor slowly rotates the internal shaft with spirally arrangedmagnets inside the nonmagnetic stainless steel cylinder. Magnetic chips/pieces attracted on theoutside of the cylinder are transferred in a sliding motion.DimensionsL1 L2 L3ProcessingCapacityPower Source Motor Revolution MassKSC -W0340φ25(1.96)×400(15.7) 400(15.7) 547(21.5) 315(12.4)Approx. 3.0kg/ 6.61 lb100 VAC10/12rpmKSC -W0360φ25(1.96)×600(23.6) 600(23.6) 747(29.4) 515(20.2) 2kg/h6WApprox. 3.5kg/ 7.71 lb(50/60Hz)(50/60Hz)KSC -W0380φ25(1.96)×800(31.5) 800(31.5) 947(37.2) 715(28.1) Approx. 4.0kg/ 8.82 lbDimensionsProcessingModel Type Nominal SizePower Source Motor Revolution MassL1 L2 L3CapacityKSC -W0505 StandardApprox. 6.0kg/ 13.2 lbφ50(1.96)×500(19.6) 551(21.6) 725(28.5) 350(13.7)KSCT -W0505 Gutter included Approx. 7.0kg/ 15.4 lbKSC -W0510 Standard3-phase30/36rpm Approx.10.0kg/ 22.0 lbφ50(1.96)×1000(39.4) 1041(40.9) 1215(47.8) 840(33.0) 60kg/h25WKSCT -W0510 Gutter included 200/220 VAC(50/60Hz) Approx.11.0kg/ 24.2 lbKSC -W0515 StandardApprox.14.0kg/ 30.8 lbφ50(1.96)×1500(59.0) 1531(60.2) 1705(67.1) 1330(52.3)KSCT -W0515 Gutter included Approx.16.0kg/ 35.2 lbDimensionsProcessingModel Type Nominal SizePower Source Motor Revolution MassL1 L2 L3 L4 CapacityKSC -W0705 Standardφ76.3(3.00)×500(19.6) 514 656 270Approx.15.0kg/ 33.0 lbKSCT -W0705 Gutter included (20.2) (25.8) (10.6) 142Approx.17.0kg/ 37.4 lb25WKSC -W0710 Standard(5.59)φ76.3(3.00)×1000(39.4)3-phase30/36rpm90kg/h200/220 VAC(50/60Hz)1014 1156 770Approx.21.0kg/ 46.3 lbKSCT -W0710 Gutter included (39.9) (45.5) (30.3)Approx.26.0kg/ 57.3 lbKSC -W0715 Standardφ76.3(3.00)×1500(59.0) 1514 1694 1270Approx.25.0kg/ 55.0 lbKSCT -W0715 Gutter included (59.6) (66.6) (49.9) 180Approx.33.0kg/ 72.7 lb40WKSC -W0720 Standard(7.08)φ76.3(3.00)×2000(78.7) 2014[mm(in)]2194 1770Approx.30.0kg/ 66.1 lbKSCT -W0720 Gutter included (79.2) (86.3) (69.6)Approx.41.0kg/ 90.4 lbDimensionsProcessingModel Type Nominal SizePower Source Motor Revolution MassL1 L2 L3 L4 CapacityKSC -W1110 Standardφ114.3(4.49)×1000(39.4) 1021 1201 770Approx.35.0kg/ 77.1 lbKSCT -W1110 Gutter included (40.1) (47.2) (30.3)Approx.40.0kg/ 88.2 lbKSC -W1115 Standard180φ114.3(4.49)×1500(59.0) 40W(7.08)1516 1696 1270Approx.46.0kg/101.4 lbKSCT -W1115 Gutter included (59.6) (66.7) (49.9)Approx.54.0kg/119.0 lbKSC -W1120 StandardKSCT -W1120 Gutter includedφ114.3(4.49)×2000(78.7) 2011(79.1)2191(86.2)1770(69.6)KSC -W1125 Standardφ114.3(4.49)×2500(98.4)※The processing capacity is a value measured in conveying SS400 chips from a gear cutting machine in a horizontal posture.※The drive posture is allowed up to an inclination of 60 degrees with the motor on top. (However, the capacity drops as the inclination angle increases.)※Model KSCT is equipped with a gutter to receive oil that drops from chips during conveyance.※For other special lengths, please contact us. The length can be increased in units of 100 mm.2506 2708 2260KSCT -W1125 Gutter included (98.6) (106.6) (88.9) 202Approx.81.0kg/178.6 lb60WKSC -W1130 Standard(7.95)φ114.3(4.49)×3000(118.1) 3001 3203 2760Approx.78.0kg/171.9 lbKSCT -W1130 Gutter included (118.1) (126.1) (108.6)Approx.95.0kg/209.4 lb250kg/h3-phase200/220 VACL3(Waterproofed part)30/36rpm(50/60Hz)[mm(in)][mm(in)][mm(in)]Approx.56.0kg/123.4 lbApprox.67.0kg/147.7 lbMAGNETIZER ANDDEMAGNETIZERMAGNETIC EQUIPMENTFOR CONVEYANCEMAGNETICSEPARATORSPOWERFUL MAGNETICSEPARATORSMEASURINGTOOLSMEASURINGINSTRUMENTSMAGNETICMATERIALS118