BookTitleMAGNET_GENERAL_CATALOG_2019

Summary

MAGNET_GENERAL_CATALOG_2019

KSCL / MCO / MCOL / CS / HSR-PU / HSModel CS FILTRATION SYSTEM WITH CYCLONE SEPARATORCS-MS-4T[Application]Suitable for efficiently collecting valuable sludge of weak magnetic and nonmagnetic materials.[Features]●The cyclone separator enables it collect nonmagnetic materials.●Collected materials can be dehydrated by the dehydration function.●A filter collection type dehydration container that is easy to handle is employed.●The twin-tub type tank construction reduces the amount of impurities that enter the clean tank.Model HSR-PU MAGNETIC PREFILTER WITH PUMPExtended Life!Revolution in Filtering for Wire Electric Discharge Machines!Power cordentranceHSR-PU12Model HS MAGNETIC PREFILTERIncreased rate of removing impuritiesin coolant by magnet & cyclone![mm(in)]ModelProcessing DimensionsTankOutputPower SourceCapacity Width Depth Height CapacityCyclone pump Supply pump MagcleanRemarksCS-MS-4T1200 800 130040L/min(47.2) (31.5) (51.1) 180L3-phase 200 VAC, 50/60 Hz 200/220VAC 3-phase 200 VAC 3-phase 200 VAC 50/60Hz 25W Magclean includedCS-4T 3-phase 220 VAC, 60 Hz 0.75kW 50/60Hz 100WーMagclean not included4002-hose nipple(φ15)13080200 100Drain valve■Model: HSR-PU12■Processing amount: Approx. 1.5 liters/min.■Pump rating: 3-phase, 200/220 VAC, 50/60 Hz, 200W■Weight: Approx. 60 kgCaution: For use of the prefilter for kerosene machining fluids, please contact us.680382Magnet unit with sludge adheringpulled out of the tank.[Application]This prefilter collects fine iron powder inmachining fluid during fluid circulation inside themachining liquid tank of wire electric dischargemachines to prolong the service life of filters.This can also be used for honing machines andhydraulic circuits (under no pressure).[Features]●This prefilter has a pump and therefore can bestarted simply by connecting hoses (two hoses)to a machining liquid tank. This can beinstalled in any place and handled easily.●The powerful magnetic force of a rare earthmagnet improves the sludge collecting rate.●The safe construction with the powerful magnetsection secured firmly facilitates cleaning.●The built-in integrating timer tells when toclean.MagnetMAGNETIC TOOLS & EQUIPMENTFOR WELDING OPERATIONLIFTINGMAGNETMAGBORE*CHIP & SLUDGECONVEYANCE EQUIPMENTENVIRONMENTALEQUIPMENTMAGNETIZER ANDDEMAGNETIZERMAGNETIC EQUIPMENTFOR CONVEYANCEMAGNETICSEPARATORSPOWERFUL MAGNETICSEPARATORSMEASURINGTOOLSLiquidMagnet coverOutletMEASURINGINSTRUMENTS[Application]This prefilter removes fine iron powder from machining liquid discharged from awire electric discharge machine (WEDM). This can also be used for honingmachines and hydraulic circuits (under no pressure).Install this prefilter at a point between a wire electric discharge machine and apump unit.[mm(in)]ModelDimensionsHose ConnectionMassHS-17175(6.88)D×200(7.87)W×230(9.05)H12kg/26 lb※Hose nipple 1-1/2 (telescopic, ODφ38) is optional.HS-17Inlet[Features]●By roughly removing fine iron powder from machining fluid with thepowerful magnet as a pretreatment, the service life of the paperfilter, for example, becomes two times longer.●The prefilter collects impurities as well as fine iron powder.Consequently, the paper filter to use may be of coarser type thanthat of the straight inflow.●The duplex construction facilitates removal of fine iron powder.TankMAGNETICMATERIALS120