BookTitleMAGNET_GENERAL_CATALOG_2019

page
13/188

This page is an overview of MAGNET_GENERAL_CATALOG_2019 on page13
Move to the page after second(s).
Now go to the page by clicking "Open the e-Book" button.

MAGNET_GENERAL_CATALOG_2019

ReadBook

Open e-Book in Flash Viewer

This e-Book is not available in your environment.

Summary

MAGNET_GENERAL_CATALOG_2019

KEZF-WS / KEZF-G / KEZF-WX / EH-VFWModel KEZF-WX ELECTROMAGNETIC ACSHIM* WITH T-SLOTSEnvironmentallyfriendlySinglestopperPatended・Design registeredKEZF-WX4080HydraulichoseProtectivecoverChuck controllerrequired additionallyPowerCordAir tube[Application]Most suitable for precise setting of workpieces including moldbases in the milling sector.[Features]●The sticks on the chuck attractive face hold workpieces in thenatural state.●Compared with Model KEZF-WS, this model offers morefreedom of increasing/decreasing the number of sticks.●The elimination of the lid of the stick section has enhancedmaintainability as there is no need to align the level of the bodyand the lid when replacing the stick unit.●The utilization of newly installed T slots enables it to clampnonferrous or irregular shaped workpieces.●Workpieces of 3 mm distortion max. can be supported.●Can be used in wet operations.ELECTROMAGNETICCHUCKSCHUCKCONTROLLERSPERMANENTMAGNETIC CHUCKSPERMANENTELECTROMAGNETIC CHUCKS〈An example of securing an aluminum plateby use of T slots.〉BLOCKSFOR MCWork supportN piecesVACUUMCHUCKSA new construction to prevent occurrence ofstick motion failure due to chips employed.PROMELTA*SYSTEM[mm(in)]Work Face Mounting Face Height Number ofDedicatedModelNominal SizeVoltage Current MassB L B? L? t H SticksControl UnitKEZF-WX 3060 300(11.8)×600(23.6) 300(11.8) 600(23.6) 310(12.2) 620(24.4)152.0A 140kg/ 308 lbKEZF-WX 4080 400(15.7)×800(31.4) 400(15.7) 800(31.4) 410(16.1) 820(32.2) 24 2.3A 250kg/ 551 lb EH-VFW205A30(1.18) 115(4.52)90 VDCKEZF-WX50100 500(19.6)×1000(39.3) 500(19.6) 510(20.0) 40 4.0A 390kg/ 859 lb1000(39.3) 1020(40.1)KEZF-WX60100 600(23.6)×1000(39.3) 600(23.6) 610(24.0) 48 6.0A 470kg/1036 lb EH-VFW210A※The control unit and clamp parts are not included. The KANETEC chucks work best when a KANETEC control unit is used.Model EH-VFW CONTROL UNIT FOR ACSHIM* FOR HIGH-PRECISION CUTTING/GRINDING AND ELECTROMAGNETIC ACSHIM* WITH T-SLOTSControls ACSHIM Series precisely by simple operation![Application]This is a dedicated unit equipped with functions to control themagnetic force of the ACSHIM and movement of sticks.[Features]●A series of operation can be performed automatically withthe auto button on the operation box.SINE BARCHUCKSBLOCKS, HOLDERS,MINI CHUCKSHOLDINGTOOLSMEASURINGTOOL HOLDERS①Start②③④Auto ON Sticks up Magnetization Workpiece holding complete⑧End⑦⑥⑤Sticks downDemagnetizationAuto OFFMachiningEH-VFW205A[mm(in)]ModelPower SourceRated OutputRequiredDimensionsControl BoxMassVoltage Current Air Pressure Width Height Depth Width Height DepthEH-VFW205ASingle-phase5A600(23.6)500(19.6)250(9.84)40kg/ 88 lb200VAC0?90 VDC0.3?0.5MPa180(7.08)180(7.08)70(2.75)EH-VFW210A50/60Hz10A700(27.5)600(23.6)300(11.8)50kg/110 lbMAGNETICHOLDERSMAGNETICTOOLS6