BookTitleMAGNET_GENERAL_CATALOG_2019

Summary

MAGNET_GENERAL_CATALOG_2019

HPCMH / PCMH2-E / PCMH2-D-A.TD-A / PCMH2-D-B / PCMH4Model PCMH2-D-A/TD-A MAGNETIC FILTER FOR VISCOUS AND HEAT-RESISTANT LIQUIDH S (When cleaning)hφDFerruleBφdModelVLKnobMaterial FinishFerruleclampFerrule AφDView:VPressure Viscosity UpperResistance Limit of ApplicableLimit Fluid (Ref)OUTFerruleAMaterialLines ofmagneticforceφ155L[Application]Since these filters have been made by welding all around, they are suitable for foodprocessing operations; in particular, most suitable for operations where the growth of bacteriais never allowed. The filter can be locked with the magnets turned off and therefore thesefilters are suitable for lines where they are to be cleaned without removing the magnet part.[Features]●Manual ON/OFF switching is possible. (Inserting and removing each magnetic bar makesthe ON/OFF operation lighter.)●The fixing part of the outer pipe that comes in contact with liquid has been welded all aroundand buffed smoothly, which prevents accumulation of liquid to ensure clean operation.●A special version having 6 magnetic bars is also available.●The working temperature up to 150℃is allowed. (TD-A type)●A super powerful magnetic filter is also available.[mm(in)]Magnetic BarSurface max.Qtymagnetic flux densityPCMH2-D15A1 1/?S 35.7(1.41) 114 330 336 153 29944 1/?SPCMH2-D20A 2 S 47.8(1.88) (4.48)(12.9)(13.2)(6.02)(11.7)PCMH2-D25A2 1/?S 59.5(2.34)55 1/?SSUS #400 500kPa 1.5×10?mPa・s SUS0.8T304 buffed (5kgf/cm2) (1.5×10?cP) 304(8000G)※A SUS316 version is also available upon request. The standard connection method is by use of ferrules, but a screw type or flange type is also available.※A type having a surface maximum magnetic flux density of 0.95 T (9500 G) is also available. (Optional)140 420 484 179 347PCMH2-D30A 3 S 72.3(2.84)(5.51)(16.5)(19.0)(7.04)(13.6)PCMH2-D35A 3 1/?S 85.1(3.35)PCMH2-TD15A1 1/?S 35.7(1.41) 114 330 336 153 29944 1/?SPCMH2-TD20A 2 S 47.8(1.88) (4.48)(12.9)(13.2)(6.02)(11.7)PCMH2-TD25A2 1/?S 59.5(2.34)55 1/?S 140 420 484 179 347PCMH2-TD30A 3 S 72.3(2.84)(5.51)(16.5)(19.0)(7.04)(13.6)PCMH2-TD35A 3 1/?S 85.1(3.35)PlatemagnetFerrule 5.5SMagnetunitMagneticsubstanceINDimensionsA d B D L H S hModel PCMH2-D-B MAGNETIC FILTER FOR VISCOUS LIQUIDPCMH2-D25BSUS #400 500kPa 1.5×10?mPa・s SUS0.8T304 buffed (5kgf/cm2) (1.5×10?cP) 304 (8000G)PCMH2-D30B63S72.32 1/?S 59.5(2.34)(2.84)PCMH2-D35B 3 1/?S 85.1(3.35)Model PCMH4 MAGNETIC FILTER FOR VISCOUS LIQUIDPCMH4-25Working Temp.Upper Limit80℃(176°F)150℃(302°F)Mass13kg/28.6 lb15kg/33.0 lb13kg/28.6 lb15kg/33.0 lbSafe and easy cleaning to enhance the work efficiency!Pressure Viscosity Upper Magnetic Bar Dimensions WorkingModel Material Finish Resistance Limit of ApplicableSurface max.Temp. Upper MassLimit Fluid (Ref)Material Qty magnetic A d B D L H hflux densityLimitPCMH2-D15B1 1/?S535.7116 330 223 147(1.41) 8kg/4 1/?S(4.56)(12.9)(8.77)(5.78)17.6 lbPCMH2-D20B 2 S 47.8[Application]This filter is recommended for installation in a passageφDbetween manufacturing processes in plants of pasty viscousfoods like juice and chemical products to separate and catchmagnetic fine particles.[Features]FerruleB●The outer pipe that comes in contact with liquid and theFerruleAmagnetic bar unit can be pulled out together, whichimproves the workability and facilitates cleaning.L●The filter is of simple construction to facilitate replacementPCMH2-D20BMagnetic barof parts and checking of magnetic bars.●A dedicated magnetic bar housing case is available optionally. Acase to house a desired number of bars is also available. [mm(in)](1.88)(H)hφdWhencleaning80℃(176°F)420 261 17814kg/(5.51)(16.5)(10.2)(7.00)30.8 lb5 1/?S 140[Application]Most suitable for collecting magnetic substances and weakmagnetic substances in manufacturing lines of viscous liquid foodsand chemical products containing solids.[Features]●These filters have been so constructed as to ensure smooth flow ofmaterials to process and cause the magnetic force to act up to thetop of the casing, ensuring efficient collection of magnetic substances.●Easy overhaul and reliable cleaning.●No liquid remains, ensuring clean operations.[mm(in)]ModelSurface Max.Magnetic FluxDensityPressureDimensionsResistanceMassLimit L H AφD360 1.5S 35.7(1.41)12.8kg/28.2 lb(14.1) 2 S 47.8(1.88)13.8kg/30.4 lbPCMH4-15PCMH4-200.35T 500kPa304PCMH4-252.5S 59.5(2.34)15 kg/33.0 lb(3500G) (5kgf/cm2) 420 (11.9)PCMH4-303 S 72.3(2.84)16.3kg/35.9 lb(16.5)PCMH4-35 3.5S 85.1(3.35)17.7kg/39.0 lbMAGNETIC TOOLS & EQUIPMENTFOR WELDING OPERATIONLIFTINGMAGNETMAGBORE*CHIP & SLUDGECONVEYANCE EQUIPMENTENVIRONMENTALEQUIPMENTMAGNETIZER ANDDEMAGNETIZERMAGNETIC EQUIPMENTFOR CONVEYANCEMAGNETICSEPARATORSPOWERFUL MAGNETICSEPARATORSMEASURINGTOOLSMEASURINGINSTRUMENTSMAGNETICMATERIALS158