BookTitleMAGNET_GENERAL_CATALOG_2019

Summary

MAGNET_GENERAL_CATALOG_2019

KESL / KETW-N / KETModel KET STANDARD RECTANGULAR ELECTROMAGNETIC CHUCKEnvironmentallyfriendlyELECTROMAGNETICCHUCKSCHUCKCONTROLLERSKET-3060FChuck controller required additionallyPERMANENTMAGNETIC CHUCKS[Application]Most widely used electromagnetic chucks for grinding operations.[Features]■High rigidity, high reliability and high accuracy!KANETEC’s original machining technology is used to realize a lavish body-to-case onepiece hollow construction, instead of a welded construction, to enhance the rigidity,minimize secular change and improve accuracy of the chucks.■KANETEC’s original light weight design!The chuck weight has been reduced as much as possible in consideration of drivingthe table of grinders. This design helps contribute to a longer service life of grinders.■Simple thin type yet strong holding power!The chucks have been designed as low as possible to increase a workpiece mountingspace on the grinder. The overall height is as short as 70 mm to 80 mm for small andmedium types and 85 mm for large types, thus various types of workpieces can beheld. Though thin, KANETEC’s original design to secure an electromagnetic coilspace ensures strong holding power.■Resin-bonded structural face plate having littleenvironmental burden employed!ModelNominal SizeWork Face Pole Pitch Mounting Face Height MountingHole PowerVoltage CurrentCordB? L? t Le P B? L? h H? GB 1HB 2thSide stopper(Not included with KET-614F.)PMassLeL 1L 2ElectroChuck MasterPower cord2?5mGRemarks[mm(in)]PERMANENTELECTROMAGNETIC CHUCKSBLOCKSFOR MCVACUUMCHUCKSPROMELTA*SYSTEMSINE BARCHUCKSKET- 614F 60(2.36)×140(5.51) 63(2.48) 140(5.51) 138(2+6)67106(4.17) 60(2.36) 170(6.69)12(0.47)(0.51) (0.31) (2.63)80.12A3.5kg/7 lbKET- 1025F 100(3.93)×250(9.84) 100(3.93)250(9.84)211(8.30) 11(2+9)(0.43) 96(3.78)294(11.5)100.16A12kg/26 lbKET- 1325F 125(4.92)×250(9.84) 125(4.92)212(8.34)119(4.68)0.19A15kg/33 lbKET- 1530F 150(5.90)×300(11.8)300(11.8)240(9.44)344(13.5)0.20A2m(78.7)21kg/46 lbKET- 1535F 150(5.90)×350(13.7) 150(5.90) 350(13.7) 20 296(11.6) 144(5.66) 394(15.5) 18(0.70) 700.22A 25kg/ 55 lb(0.78)14(2+12)14KET- 1545F 150(5.90)×450(17.7) 450(17.7) 408(16.0) 494(19.4) (2.75)0.29A 32kg/ 70 lb(0.55)KET- 2040F 200(7.87)×400(15.7)400(15.7)352(13.8)444(17.4)0.43A38kg/83 lbKET- 2050F 200(7.87)×500(19.6) 200(7.87) 500(19.6)464(18.2)194(7.63) 544(21.4)0.34A47kg/ 103 lbKET- 2060F 200(7.87)×600(23.6)600(23.6)548(21.5)600(23.6)0.47A57kg/ 125 lbKET- 2550F 250(9.84)×500(19.6) 500(19.6) 451(17.7)250(9.84) 240(9.44) 3m(118)※ES-M103B0.56A 67kg/ 147 lbKET- 2560F 250(9.84)×600(23.6) 600(23.6) 529(20.8) 600(23.6) 0.72AES-M305BEH-V305A90 VDCEH-VE305A8080kg/ 176 lbKET- 3050F 300(11.8)×500(19.6)500(19.6) 451(17.7)500(19.6) 0.68A(3.15)KET- 3060F 300(11.8)×600(23.6) 300(11.8) 600(23.6) 529(20.8) 290(11.4) 600(23.6) 1.06A 94kg/ 207 lbKET- 3090F 300(11.8)×900(35.4)900(35.4)841(33.1)900(35.4)1.22A5m(196) 145kg/ 319 lbKET- 4050F 400(15.7)×500(19.6)500(19.6)451(17.7)500(19.6)0.96A114kg/ 251 lb3m(118)KET- 4060F 400(15.7)×600(23.6)600(23.6)529(20.8)600(23.6)1.09A137kg/ 302 lbClamping2519.5(2.5+17)20(0.78)(no hole)400(15.7)390(15.3)KET- 4080F 400(15.7)×800(31.5) 800(31.5) 724(28.5) 800(31.5) 1.42A 182kg/ 401 lb5m(196)KET-40100F 400(15.7)×1000(39.4) 1000(39.4) 958(37.7) 1000(39.4) 1.74A 228kg/ 502 lb(0.98)(0.76)KET- 5050F 500(19.6)×500(19.6)500(19.6)451(17.7)500(19.6)0.93A142kg/ 313 lbKET- 5060F 500(19.6)×600(23.6) 600(23.6)500(19.6)529(20.8)600(23.6)490(19.2)851.06A3m(118) 171kg/ 377 lbKET- 5065F 500(19.6)×650(25.5)650(25.5)607(23.9)650(25.5)(3.34)1.30A185kg/ 407 lbKET-50100F 500(19.6)×1000(39.4)1000(39.4)958(37.7)1000(39.4)1.71A5m(196) 285kg/ 628 lbKET- 6060F 600(23.6)×600(23.6) 600(23.6) 529(20.8)600(23.6) 1.48A 3m(118) 205kg/ 451 lb600(23.6) 590(23.2)KET-60100F 600(23.6)×1000(39.4) 1000(39.4) 958(37.7) 1000(39.4) 3.10A 5m(196) 342kg/ 754 lb Above modelsKET- 7075F 700(27.5)×750(29.5) 700(27.5) 750(29.5) 685(26.9) 690(27.1) 750(29.5) 2.87A 3m(118) 299kg/ 659 lbexcept forthe oneKET-80100F 800(31.5)×1000(39.4) 800(31.5) 1000(39.4) 958(37.7) 790(31.1) 1000(39.4) 4.23A 5m(196) 456kg/1005 lb marked by※.※For types with acombination of arectifier anddemagnetizer, seepages of“ChuckControllers.”※If the magnetic force needs not be adjusted, use ES-M.※The chuck controller and clamp parts are not included. The KANETEC chucks work best when a KANETEC chuck controller is used.※Except for KET-614F, only the side stopper is included. (The back stopper is not included.)※Chucks for electric discharge machining are also available. Please contact us. (Model KET-ED)P17?P20BLOCKS, HOLDERS,MINI CHUCKSHOLDINGTOOLSMEASURINGTOOL HOLDERSMAGNETICHOLDERSMAGNETICTOOLS10