BookTitleMAGNET_GENERAL_CATALOG_2019

Summary

MAGNET_GENERAL_CATALOG_2019

ELECTROMAGNETIC CHUCKPERMANENTPERMANENTCHUCKSCONTROLLERS MAGNETIC CHUCKS ELECTROMAGNETIC CHUCKSBLOCKSFOR MCVACUUMCHUCKSPROMELTA*SYSTEMSINE BARCHUCKSBLOCKS, HOLDERS,MINI CHUCKSHOLDINGTOOLSMEASURING MAGNETICTOOL HOLDERS HOLDERSMAGNETICTOOLS15ELECTROMAGNETIC CHUCKSModel KCT WATER-COOLED RECTANGULAR ELECTROMAGNETIC CHUCKEnvironmentallyfriendlyChuck controller required additionally[Application]Since no heat is generated when the power is on, this model is suitablefor high precision grinding.Work Face Pole Pitch Mounting Face Height MountingHoleBH 1h tB 2Side stopperpHose jointElbowLeL 1L 2Power cord2?3m[Features]●A special construction to cool the electromagnetic coils directly.●A unique construction; accuracy change is very small and temperature rise isminimized by using both cooling water flowing inside the chuck and grindingfluid sprayed over the top surface. This design minimizes thermal expansionof the chuck due to temperature rise.●Cooling water flows inside the chuck, but KANETEC’s original designprotects the internal coils from damage.●Most suitable for dry grinding operations as heat of workpieces is also removed.●A resin-bonded structural face plate having little environmental burden is employed.HosePowerVoltage CurrentCoupling CordModel Nominal SizeMassB? L? t Le P B? L? h H GKCT-1025F 100(3.93)×250(9.84) 100(3.93) 250211(8.30)(9.84)21(0.82)11(2+9)(0.43) 96(3.78) 10(0.39)0.16A15kg/ 33 lb294(11.5)KCT-1325F 125(4.92)×250(9.84) 125(4.92) 212(8.34)119(4.68)0.19A 19kg/ 41 lbKCT-1530F 150(5.90)×300(11.8)300(11.8) 240(9.44)344(13.5) 0.20A 2m 26kg/ 57 lbKCT-1535F 150(5.90)×350(13.7) 150(5.90) 350(13.7) 296(11.6) 144(5.66) 394(15.5) 850.22A (78.7) 31kg/ 68 lb14(2+12)14(0.55)KCT-1545F 150(5.90)×450(17.7) 450(17.7) 408(16.0) 494(19.4) (3.34)0.29A 39kg/ 85 lb(0.55)KCT-2040F 200(7.87)×400(15.7)400(15.7) 352(13.8)444(17.4)φ80.43A 46kg/101 lbKCT-2050F 200(7.87)×500(19.6) 200(7.87) 500(19.6) 464(18.2) 194(7.63) 544(21.4) (0.31) 0.34A57kg/125 lbKCT-2060F 200(7.87)×600(23.6) 600(23.6) 548(21.5) 600(23.6) 250.47A 66kg/145 lb90 VDCKCT-2550F 250(9.84)×500(19.6) 500(19.6) 451(17.7)(0.98)250(9.84) 240(9.44)3mClamping2519.5(2.5+17)(118)(No hole)(0.98)(0.76)500(19.6)0.56A 80kg/176 lbKCT-2560F 250(9.84)×600(23.6) 600(23.6) 529(20.8) 600(23.6) 950.72A 97kg/213 lbKCT-3050F 300(11.8)×500(19.6) 500(19.6) 451(17.7)500(19.6) (3.74)0.68A 93kg/205 lb300(11.8) 290(11.4)KCT-3060F 300(11.8)×600(23.6) 600(23.6) 529(20.8) 600(23.6) 1.06A 112kg/247 lbKCT-4050F 400(15.7)×500(19.6) 500(19.6) 451(17.7)400(15.7) 390(15.3) 500(19.6)0.96A 132kg/291 lbKCT-4060F 400(15.7)×600(23.6) 600(23.6) 529(20.8) 600(23.6) 100φ121.09A 159kg/350 lbKCT-5050F 500(19.6)×500(19.6) 500(19.6) 451(17.7)500(19.6) (3.93) (0.47) 0.93A 167kg/368 lb500(19.6) 490(19.2)KCT-5060F 500(19.6)×600(23.6) 600(23.6) 529(20.8) 600(23.6) 1.06A 204kg/449 lbGElectroChuck Master※ES-M103BES-M305BEH-V305AEH-VE305A[mm(in)]Remarks※For types witha combinationof a rectifier anddemagnetizer,see pages of“ChuckControllers.”※If the magnetic force needs not be adjusted, use ES-M.※A cooler unit is required additionally.※The chuck controller and clamp parts are not included. The KANETEC chucks work best when a KANETEC chuck controller is used.※Only the side stopper is included. (The back stopper is not included.)Model KCT-U WATER-COOLED TILT TYPE ELECTROMAGNETIC CHUCKEnvironmentallyfriendlyWatercooledWatercooledKCT-1535UFB2H2Gdh1h2?2?1Back stopperChuck controller required additionallya1PKCT-2550FB1L1LeL2H1Power cord 2 ma20?2?1P17?P20[Application]Suitable for high precision angle grinding.[Features]●Cooling water flows inside the chuck, but KANETEC’s original designprotects the internal coils from damage.●Since the cooling hose is connected to the shaft, a desired tilting rangecan be set.●The hose does not become an obstacle regardless of tilting angles of thework face. Grinding at a tilted angle can be carried out without payingattention to the hose location.●The tilting angle can be set as desired in a range of 90°forward and 90°backward.●Cooling water is let flow inside the chuck to cool the coils directly andgrinding fluid cools the top surface to provide a high cooling effect to minimizetemperature rise. This design thus minimizes accuracy change of the chuck.●A resin-bonded structural face plate having little environmental burdenis employed.[mm(in)]CouplingVoltage Current MassElectroRemarksChuck MasterWork Face Pole Pitch Tilt Base Length HeightModel Nominal SizeHoseB? L? Le H? P B? ?? ?? G h? h? a? a? L? H?KCT-1025UF 100(3.93)×250(9.84)250(9.84) 211(8.30) 11(2+9)100(3.93)(0.43)100(3.93)95382(15.0)0.16A 21kg/ 46 lb75 16125KCT-1030UF 100(3.93)×300(11.8) 300(11.8) 255(10.0) 432(17.0) 0.21A 23kg/ 50 lb(3.74)(2.95)(0.63)(4.92)KCT-1040UF 100(3.93)×400(15.7) 400(15.7) 365(14.3)532(20.9) 0.26A 30kg/ 66 lb5414KCT-1230UF 120(4.72)×300(11.8) 120(4.72) 0.21A 29kg/ 64 lb300(11.8) 240(9.44)(2.12)25(0.55)8 16 432(17.0)φ8KCT-1530UF 150(5.90)×300(11.8)10090 VDC14(2+12)(0.98)91 18(0.31)(0.62)1410.20A 37kg/ 81 lb(0.31)KCT-1535UF 150(5.90)×350(13.7) 150(5.90) 350(13.7) 296(11.6) (3.93)(3.58)(0.70)482(18.9) (5.55)0.22A 41kg/ 90 lb(0.55)KCT-1545UF 150(5.90)×450(17.7) 450(17.7) 408(16.0) 582(22.9) 0.29A 51kg/112 lbKCT-2050UF 200(7.87)×500(19.6) 500(19.6) 464(18.2) 120 5916 120 20642(25.2) 1700.34A 76kg/167 lb200(7.87)KCT-2060UF 200(7.87)×600(23.6) 600(23.6) 548(21.5) (4.72)(2.32)(0.62)(4.72)(0.78)742(29.2) (6.69)0.47A 89kg/196 lb※If the magnetic force needs not be adjusted, use ES-M.※A cooler unit is required additionally.※The chuck controller and clamp parts are not included. The KANETEC chucks work best when a KANETEC chuck controller is used.ES-M103BES-M305BEH-V305AEH-VE305A※For types witha combinationof a rectifier anddemagnetizer,see pages of“ChuckControllers.”P17?P20