Summary
MAGNET_GENERAL_CATALOG_2019
RMT / RMT-U / RMT-V / RMT-J / RMWH / RMWH-JModel RMT-J ADDITIONALLY WORKABLE RECTANGULAR PERMANENT MAGNETIC CHUCKBack stopper(1face)Side stopper(1face)BPLeL[Application]Powerful permanent magnetic chucks for a wide range of applicationsfrom heavy duty grinding to light duty cutting. Usable in liquid also.[Features]●By additionally machining the work face, it becomes possible to holdby magnetism such irregular shaped workpieces that cannot be held ona flat surface. Also by additionally making mounting holes on themounting face, it becomes possible to mount the chuck on pallets, etc.●The work face can be machined to a depth of 13 mm max. andthe mounting face to a depth of 25 mm max.ELECTROMAGNETICCHUCKSHCHUCKCONTROLLERSNominalModelSizeRMT-J1515 150(5.90) 150 150 107.7×150(5.90)(5.90)(5.90)(4.24)RMT-J2020 200(7.87) 200 200 151.2×200(7.87)(7.87)(7.87)(5.95)RMT-J2020Model RMWH RECTANGULAR PERMANENT MAGNETIC MICROPITCH CHUCKRMWH-2040CModel RMWH-J ADDITIONALLY WORKABLE RECTANGULAR PERMANENT MAGNETIC CHUCKRMWH-J1325ModelL1LeL2NominalSizeWork Face Pole Pitch Height Handle Hole Additionally Workable DepthMassB L Le P H E Work Face Mounting FacePE14.5(1.5+3.2+1.5+8.3)0.57(0.05+0.12+0.05+0.32)Bh tH85(3.34)8(0.31)Max.13(0.51)Max.25(0.98)※A hex wrench key is included with Model RMT-J1515 and a dedicated handle is included with Model RMT-J2020.15kg/33.0 lb27kg/59.5 lb[Application]Suitable for grinding thin, thick and small workpieces.[Features]●Extremely low profile, 45 mm for small to medium sizes and 50 mm for large sizes and light weight.●A wide attractive area on the chuck work face, allowing the corners to be utilized.●The magnetic force ON-OFF handle can be operated lightly thanks to a special slidedesign. The side insert type used allows the handle to be detached when it is not used.●A micropitch type having very fine pole-to-pole pitches. This design provides effectiveholding power not only on thick workpieces but also on thin and small workpieces.●Drip-proof specification. (Not usable in liquid)※For use in liquid, please use Model RMWH-ED.[mm(in)]ModelNominal SizeWork Face Pole Pitch Mounting Face Height Handle HoleB L? Le t P B L? h H EMassRMWH- 713C 75(2.95)×130(5.11)75(2.95) 130(5.11) 103(4.05)75(2.95) 146(5.74)3.8kg/8 lbRMWH-1018C 105(4.13)×175(6.89)175(6.89) 142(5.59)191(7.52)7kg/ 15 lbRMWH-1025C 105(4.13)×250(9.84) 105(4.13) 250(9.84) 208(8.18)105(4.13) 266(10.4)9.5kg/ 20 lbRMWH-1030C 105(4.13)×300(11.8)300(11.8) 256(10.0)316(12.4)11.5kg/ 25 lbRMWH-1325C 130(5.11)×250(9.84) 130(5.11)250(9.84) 208(8.18)130(5.11)266(10.4)12kg/ 26 lbRMWH-1515C 150(5.90)×150(5.90)150(5.90) 118(4.64)10 45166(6.53)(0.39)(1.77)8.5kg/ 18 lbRMWH-1530C 150(5.90)×300(11.8)300(11.8) 256(10.0)316(12.4)16.5kg/ 36 lb150(5.90)RMWH-1535C 150(5.90)×350(13.7) 350(13.7) 298(11.7)150(5.90)366(14.4)19kg/ 41 lbRMWH-1545C 150(5.90)×450(17.7)18 3(1+2)8450(17.7) 394(15.5) 466(18.3)(0.70) (0.11)(0.31)24.5kg/ 53 lbRMWH-2035C 200(7.87)×350(13.7)350(13.7) 298(11.7)366(14.4)26kg/ 57 lbRMWH-2040C 200(7.87)×400(15.7)400(15.7) 346(13.6)416(16.3)29.5kg/ 64 lb200(7.87)RMWH-2050C 200(7.87)×500(19.6) 500(19.6) 442(17.4)200(7.87)516(20.3)145040kg/ 88 lbRMWH-2060C 200(7.87)×600(23.6)600(23.6) 541(21.3)616(24.2) (0.55)(1.97)48kg/105 lbRMWH-2525C 250(9.84)×250(9.84) 250(9.84) 208(8.18)266(10.4) 10 4524kg/ 52 lb250(9.84) 250(9.84)RMWH-2530C 250(9.84)×300(11.8) 300(11.8) 256(10.0) 316(12.4) (0.39)(1.77)28kg/ 61 lbRMWH-3050C 300(11.8)×500(19.6) 500(19.6) 442(17.4)516(20.3) 14 5060kg/132 lb300(11.8) 300(11.8)RMWH-3060C 300(11.8)×600(23.6) 600(23.6) 541(21.3) 616(24.2) (0.55)(1.97)72kg/158 lb※As for the handle, a hex wrench key is included.Work Face Pole Pitch Mounting Face Height ProcessableDimensionsHandleHoleB L? Le t? P B L? h H t? E[mm(in)][mm(in)]3(1+2)130(5.11) 130 250 208 33130 266 10 55 Max.15 8 15kg/RMWH-J13250.11×250(9.84)(5.11)(9.84)(8.18)(1.29)(5.11)(10.4)(0.39)(2.16)(0.59) (0.31) 33.0 lb(0.03+0.07)※As for the handle, a hex wrench key is included.EMass[Application]Suitable for grinding thin, thick and small workpieces.[Features]●As with the standard Model RMWH, this is a micropitch typehaving very fine pole-to-pole pitches. This design provideseffective holding power not only on thick workpieces butalso on thin and small workpieces.●Since the chuck work face can be machined to a depth of15 mm max., workpieces that do not have a flat attractiveface can also be held firmly.●By machining holes and slots according to workpieceshapes in advance, the workpiece securing and setting uptime can be reduced significantly when compared with theconventional mechanical clamping method.●Since the face plate is thicker than the standard ModelRMWH by 15 mm, this chuck can be used for a longerperiod of time in applications that require frequent self-cut.●The chuck mounting section is made of iron, which allowsthe chuck to be held on an existing magnetic chuck.Sizes up to 130 mm wide×250 mm long maximum available.PERMANENTMAGNETIC CHUCKSPERMANENTELECTROMAGNETIC CHUCKSBLOCKSFOR MCVACUUMCHUCKSPROMELTA*SYSTEMSINE BARCHUCKSBLOCKS, HOLDERS,MINI CHUCKSHOLDINGTOOLSMEASURINGTOOL HOLDERSMAGNETICHOLDERSMAGNETICTOOLS24
