BookTitleMAGNET_GENERAL_CATALOG_2019

Summary

MAGNET_GENERAL_CATALOG_2019

BLOCKS, HOLDERS, MINI CHUCKSELECTROMAGNETIC CHUCKPERMANENTPERMANENTCHUCKS CONTROLLERS MAGNETIC CHUCKS ELECTROMAGNETIC CHUCKSBLOCKSFOR MCModel RMAW-2F TWO-FACE HOLDING BLOCK FOR SMALL WORKPIECEHKANETECRMAW-2F0812Bottom face operationONPOFFLOFFONTop face operationRMAW-2F0812indicates the attractive face.BMost powerful 2-face holding block![Application]Suitable for holding workpieces in various operations such as grinding and lightduty cutting, measurement and assembly work.[Features]●The strongest holding power among small permanent magnetic types.Furthermore, by making the pole pitch finer, this model holds small and thinworkpieces firmly. This model is also effective for holding relatively largeworkpieces that cover the whole attractive face.●The top and bottom faces can be turned on and off individually. It can be seteasily on the machine table or work table to shorten the setup time.●Since a workpiece can be held on its side face, workpieces can be heldvertically or on three faces.※When a workpiece is held on the top face orbottom face and the side face simultaneously, the holding power of each facedrops.●By using tapped holes on three side faces and bottom face, stoppers andfixtures can be mounted.[mm(in)]HoldingDimensionsPole PitchModelMassPowerB L H PRMAW-2F0812785N(80kgf)80(3.15)120(4.72)50(1.96)6(2+4)0.23(0.07+0.15)※The holding power is the largest value obtained using a test piece of□50×t25, S15C.※A hex wrench key is included.Model KPB DOUBLE-FACE/SINGLE-FACE HOLDING PERMANENT MAGNETIC BLOCK3.7kg/8.15 lbVACUUMCHUCKSPROMELTA*SYSTEMSINE BARCHUCKSBLOCKS, HOLDERS,MINI CHUCKSHOLDINGTOOLSKPB-1F18An example of using double-face holding blockKPB-2F18[Application]These blocks can hold workpieces during electricdischarge machining and grinding. They can also beused as holding tools for assembly and light dutymachining.[Features]●The both sides can hold workpieces and can beturned on and off individually. (2F type)●They are secured to the work table by turning on andoff the magnet. (2F type)●The side faces (ON/OFF switchover face) can alsohold workpieces. (2F type)●They are secured to the work table using tappedholes provided on the mounting face. They can alsobe secured by having them held by a magneticchuck. (1F type)●The operation part is provided on both side faces tofacilitate on/off operation.●Light weight for easy positional adjustment.●The operating handle is detachable and does nothinder the work.●One set of two blocks has been machined andfinished together.●They are of drip-proof and oil-resistant constructionto allow them to be used in fluid.MEASURING MAGNETICTOOL HOLDERS HOLDERSMAGNETICTOOLS53■?S ingle face type[mm(in)]ModelNominal SizeHoldingDimensionsPole PitchPower B L H L? PMassKPB-1F1350(1.96)×125(4.92) 250N(25kgf)1.5kg/3.3 lb×2KPB-1F18125(4.92) 85(3.34)52351.5(0.5+1.0)50(1.96)×180(7.08) 350N(35kgf) 180(7.08) 110(4.33) 2.2kg/4.8 lb×2(2.04) (1.37)0.05(0.02+0.03)KPB-1F2550(1.96)×250(9.84) 500N(50kgf)250(9.84)150(5.90)3.1kg/6.8 lb×2※The holding power is based on a test piece of SS400, 20 mm thick (ground surface) held on the whole face.※Ahexwrenchkeyisincluded.■?D ouble face type[mm(in)]ModelNominal SizeHoldingDimensionsPole PitchPower B L H PMassKPB-2F1350(1.96)×125(4.92)250N(25kgf) 125(4.92)2.5kg/ 5.5 lb×25250 1.5(0.5+1.0)KPB-2F18 50(1.96)×180(7.08) 350N(35kgf) 180(7.08) 3.6kg/ 8.0 lb×2(2.04)(1.96) 0.05(0.02+0.03)KPB-2F2550(1.96)×250(9.84) 500N(50kgf)250(9.84)5.0kg/11.1 lb×2※The holding power is based on a test piece of SS400, 20 mm thick (ground surface) held on the whole face.※A hex wrench key is included.BBHHPPBottom faceoperationLM8, depth 10L1LTop faceoperationindicates the attractive face.