BookTitleMAGNET_GENERAL_CATALOG_2019

Summary

MAGNET_GENERAL_CATALOG_2019

YS / MV/ MP / KRSModel KRS HANDY SUPPORT JACK“RISING”PatentedMovablebolt[Application]Suitable for supporting the overhanging portion of workpieces during machiningand measurement.[Features]●The support bolt moves up and down as the movable bolt is turned. This designenables expansion/contraction or up/down movement quickly by one hand.●Since the support bolt does not rotate, it does not damage workpieces when itcontacts them.●The movable/support bolts can be locked simultaneously by tightening the knobto enhance the work efficiency.※If the knob is likely to be loosened by vibrations, use the included grub screw.●The use of top and bottom two types of attachments (optional) expands theapplications.SupportboltELECTROMAGNETICCHUCKSCHUCKCONTROLLERSPERMANENTMAGNETIC CHUCKSKRS-045CapKnobPERMANENTELECTROMAGNETIC CHUCKSSupporting the overhandingportion of workpieceSupporting the hollow portionduring grinding■Main unitWhen downM6,depth10[mm(in)]ModelMain UnitHeightAllowable Load in F DirectionMassKRS-045φ45(1.77) 49-82(1.92-3.22) 9.81kN 0.48kg/1.05 lb※A grub screw is included.When upBLOCKSFOR MCVACUUMCHUCKSPROMELTA*SYSTEMGuideMagnetKRS-HQMMagnetKRS-HVMGuidereceiverKRS-M2KRS-M4●When secured by using the magnet 2-poletype, slippage of the body when operated byone hand can be prevented.●The use of the magnet 4-pole type togetherenables mounting on the vertical face ofhorizontal machining centers, etc. or reversemounting.A drain is provided on the mating surfacewith the body of the bottom partmounting magnet to discharge machiningliquid that has entered the inside.SINE BARCHUCKSBLOCKS, HOLDERS,MINI CHUCKSSphericalV-grooveAn example of use onhorizontal machining centerHOLDINGTOOLS2-MagnetHolding power 24.5N(2.5kgf)[mm(in)]ModelShapeDimensionsMassKRS-HQMKRS-HVMAttractive face2-MagnetHolding power 24.5N(2.5kgf)Sphere(SR50)V-groove(120°)AttractivefaceMeasuring round bar by useof V-groove attachment■Top workpiece supporter(Optional)φ42(1.65)×10.6(0.41)0.13kg/0.28 lbTopworkpiecesupporter“RISING”+ body +Bottommagnet※Magnet 4-pole type■Magnets for bottom part mounting(Optional)[mm(in)]ModelNo.of PolesHolding PowerDimensionsMassKRS-M2 2 24.5N(2.5kgf)KRS-M4 4 49N(5kgf)※One hex. socket head bolt (M6×10) is included.Attractiveface2-MagnetDrainMountingbolt holeHolding power 24.5N(2.5kgf)φ45(1.77)×10(0.39)4-MagnetHolding power 49N(5kgf)0.13kg/0.28 lbMEASURINGTOOL HOLDERSMAGNETICHOLDERSMAGNETICTOOLS62