BookTitleMAGNET_GENERAL_CATALOG_2019

page
79/188

This page is an overview of MAGNET_GENERAL_CATALOG_2019 on page79
Move to the page after second(s).
Now go to the page by clicking "Open the e-Book" button.

MAGNET_GENERAL_CATALOG_2019

ReadBook

Open e-Book in Flash Viewer

This e-Book is not available in your environment.

Summary

MAGNET_GENERAL_CATALOG_2019

MB-P / MBInformation about additional working on magnetic holder bases※Precautions1) The■areas shown in the following figures can beworked on additionally.2) If areas (magnet, separator, main unit structural part)other than the■areas are worked on, the ON-OFFoperation may be disabled or the main unit may bedamaged or disabled in the worst case.MB-PBCommon base typeMB-B/MB-BV/MB-K/MB-FXMB-MX20F/KM-B1/MR-2C552530φ351210 20(9.25) (19.25)M8×1.25, depth 7A55Section A ? Aφ35MB-PR3) Additional working may cause a drop in the holding power and strength. Priorto using the base after additional working, always check its performance.4) If a plate is to be mounted on the top face (a tapped hole provided), be sure touse a nonmagnetic material (e.g. aluminum, SUS304, brass plate). If amagnetic material such as iron is mounted on the top face, the holding powerwill drop significantly.Common base typeMB-RV/MB-W2V/MB-W2S/MB-MX28F/MB-MX40F/MB-OX55(SGD2)25138―M621.536.530(94.2)73M821.551.5536.5 7.5Separator (ZDC2)φ35(Magnet)4.541MB-PLCommon base typeMB-T3 (Top face tapped hole M20)5513(SDG2)253013.516―M6133.711758.5 58.5M10(MB-T3:M20)5 51.530 30 30 13.57.5Separator (ZDC2)φ35(Magnet)304.541ELECTROMAGNETICCHUCKSCHUCKCONTROLLERSPERMANENTMAGNETIC CHUCKSPERMANENTELECTROMAGNETIC CHUCKSBLOCKSFOR MCMB-PGCommon base typeKM-B2/MB-2FPG (No tapped hole on top face)16―M6M8 (No hole on MB-2FPG)15(SDG2)52※125※22715A(29.25)(29.25)1958.5(79.7)30 30 30 15141.312060 606 627.5125019Separator (ZDC2)φ35(Magnet)4.541MB-PHCommon base typeMB-Z(Top face tapped hole, height andattractive face shape are different.)80※3617Yoke(SGD2)8―M6M1215 40 15(87.4)7035 35(M20 for MB-Z)111912 1950Separator (ZDC2)φ48(Magnet)659MB-PRW5513Yoke(SGD2)25308―M63 021.5 3021.5(95.4)7336.5 36.5φ392―M85 51.57.51912 1950Separator (ZDC2)φ35(Magnet)4.541VACUUMCHUCKSPROMELTA*SYSTEMSINE BARCHUCKSBLOCKS, HOLDERS,MINI CHUCKS(※1 MB-2FPG: 51.5 mm)(※2 MB-2FPG: 24.5 mm)MB-PSCommon base typeMB-PSL/MB-PSX20 61912 1950Section A44(※Height 76 mm for MB-Z)MB-PM※※26182670(※MB-Z has a different shape.)Common base typeMB-MX13F(The paint color is different)5 5 20 5 5Separatorφ25 (Magnet)MB-0404M6, depth 614.5Separator304019125019HOLDINGTOOLSMEASURINGTOOL HOLDERS5 631A14 92.3 6.7Separatorφ24(Magnet)40φ3015.5 9 15.521.540(15)304024-M3, depth 6φ20(Magnet)MAGNETICHOLDERS34(46.3)351911.5 7 11.530(58)408.51535MAGNETICTOOLSM35 2 572