CIRCULAR TYPE [Model EPC-ARF] CATALOG
Highly precise rotary grinding operations realized!

Ring-pole type
EPC-120ARF 		[Application]
Most suitable for grinding operations by rotary grinders.

[Features]
  • Since electricity needs not be supplied continuously (momentarily supplied only when mounting and demounting workpieces), heat generation and thermal deformation are minimal, thus highly precise machining operations are possible. Also, the running cost is very low and electricity can be saved.
  • The holding power is maintained by the permanent magnet in the case of such troubles as power failure and cable breakage to enhance safe operations.
  • In addition to four standard sizes, sizes of φ500 mm minimum and up to φ1500 mm are available.
  • Can be used in wet operations
  • A resin-bonded structural face plate having little environmental burden is employed.

Chuck controller required additionally




EPS-GWB230A 		 


[mm(in)]
Model Nominal Size Work Face Pole Pitch Mounting Face Height Voltage Mass Electro
Chuck
Master
D1 D2 de D2 K n M Dp H
EPC- 63ARF 630(24.8) 630(24.8) 580(22.8) 100(3.93) 14(2+12)
0.55
(0.07+0.47)		 300
(11.8)		 4
(0.15)		 5 M12(0.47) 500
(19.6)		 120(4.72) 180
VDC		 250kg/
551lb		 EPS-
GWB230A
EPC- 80ARF 800(31.4) 800(31.4) 748(29.4) 400
(15.7)		 6 650
(25.5)		 410kg/
904lb
EPC- 103ARF 1030(40.5) 1030(40.5) 976(38.4) 104(4.09) 550
(21.6)		 8 850
(33.4)		 680kg/
1499lb
EPC- 120ARF 1200(47.2) 1200(47.2) 1144(45.0) 600
(23.6)		 1000
(39.3)		 930kg/
2050lb