Most suitable for precise setting of workpieces including mold bases in the milling sector.

  • The sticks on the chuck attractive face hold workpieces in the natural state.
  • Compared with Model KEZF-WS, this model offers more freedom of increasing/decreasing the number of sticks.
  • The elimination of the lid of the stick section has enhanced maintainability as there is no need to align the level of the body and the lid when replacing the stick unit.
  • The utilization of newly installed T slots enables it to clamp nonferrous or irregular shaped workpieces.
  • Workpieces of 3 mm distortion max. can be supported.
  • Can be used in wet operations.
Chuck controller required additionally

A new construction to prevent occurrence of stick motion failure duetochipsemployed.

<An example of securing an aluminum plate
by use of T slots.>
Model Nominal Size Work Face Mounting Face    Height Number of Sticks Voltage Current Mass Dedicated Control Unit
B L B1 L1  t  H
KEZF-WX3060 300(11.8)X60(23.6) 300(11.8) 600(23.6) 310(12.2) 620(24.4) 30
 115(4.52)  15 90 VDC 2.0A 140kg/ 308lb EH-VFW205A 
KEZF-WX4080 400(15.7)X800(31.4) 400(15.7) 800(31.4) 410(16.1) 820(32.2) 24  2.3A 250kg/ 551lb
KEZF-WX50100 500(19.6)X1000(39.3) 500(19.6) 1000(39.3) 510(20.0) 1020(40.1)  40 4.0A 390kg/ 859lb
KEZF-WX60100 600(23.6)X1000(39.3) 600(23.6) 610(24.0) 48  6.0A 470kg/1036lb EH-VFW210A