KANETEC LOGO
Searches for this site. Japanese | English
HOMEPRODUCTSDOWNLOADSCONTACT US
MAGNETIC RAIL [Model KRA] CATALOG
KRA-A
KRA-A
KRA-B
KRA-B
KRA-D
KRA-D

The magnetic rails are tools that are installed on the backside of belts to convey various items such conveyance. These rails are used to improve the work efficiency.

[Application]
Recommended for such operations as vertical and inclined conveyance of full cans and empty cans, conveyance of press scraps and chips, leak inspection of aerosol cans and belt conveyance in manufacturing processes.
[Features]
Two types, permanent magnetic rails and electromagnetic rails are available according to operations.
Easy handling of products and goods.
Since no fixtures are necessary, products and goods to convey are not damaged.

Reject gate conveyor

Sorter

[Application]
Can be used in lines to accept or reject inspected sheets.
The flow of sheets can be branched to two directions.

Backing conveyor

Reverser

[Application]
Can be used in such operations as turning sheets or reversing the sheet flowing direction to inspect the back-side of thin steel plates and to shorten the drying line in painting shops and for mating machines.

Sheet piler

Steel sheet piler

[Application]
Sheets can be piled smoothly by use of a magnetic conveyor.

Permanent magnetic rail

KRA-A type permanent magnetic rail

A magnetic plate is installed inside a stainless steel case. Can be easily connected to the poles of a permanent magnetic pulley. Used for elevator type magnetic conveyors.

KRA-B type permanent magnetic rail

Poles of a magnet are projecting to the inside of a stainless steel case. A strong holding power via a belt. Used for magnetic conveyors that convey thin steel plates in the inverted posture.

Electromagnetic rail

KRA-C type electromagnetic rail

Used for magnetic conveyors that receive steel plates that have been conveyed in the inverted posture by a piler.
Rating: 180 VDC, continuous

KRA-D type electromagnetic rail with rollers

An electromagnetic rail having rollers. Used to prevent drooping of steel plates after shearing machines.
Rectifier RH-MW type
Input 200 VAC, single-phase output 0―180
VDC, 5 A/10 A

SITE MAP
Copyrightę 2006-2008 by KANETEC CO.,LTD. All rights reserved.