VACUUM CHUCK (BUILT-IN VACUUM SYSTEM) [Model KVR-GVW] CATALOG
No external vacuum system required!
Air consumption reduced significantly!


KVR-GVW2050
KVR-GVW2050
[Application]
Suitable for light duty cutting by vacuum chucking such nonmagnetic workpieces as aluminum alloy, copper alloy, stainless steel and plastics.

[Features]

  • Compared with the conventional ejector vacuum system, the air consumption amount can be reduced significantly.
  • The chuck can be used by simply connecting a quick-connector type tube to a compressor in the factory.
  • Since no vacuum system is required, the chuck has good response and is capable of holding and releasing workpieces quickly.
  • Since air can be injected reversely through the suction port, the inside can be cleaned to facilitate maintenance.
  • The internal parts can be replaced easily by removing the front cover of the chuck.
  • The material of the main unit can be selected from two kinds; mild steel and aluminum alloy.
  • Can be used in wet operations.