BATTERY ACE™ [Model LME-F/FJ] CATALOG
NEW BATTERY ACE NOW AVAILABLE, 30% MORE COMPACT.
2 Types available depending on function.
Standard LME-F Series.



LME-30F
LME-30F

Operation is now much easier !
New cam switch provides better manual switching function, even with leather gloves.

Cam Switch
LME-FJ Series
Attraction lift and release of work can be switch between automatic/manual.

LME-30FJ
LME-30FJ

New!
A Proximity Sensor is used for automatic operating detection, even when conditions are hampered by dirt, particulate, preventing proper operations and providing safety and confidence.

Auto/Manual operation selected by switch operation.
When in AUTO mode, work can be attached and/or released automatically. The working can be done without input-operation from remote place. (whenever it is loaded on the ground, attraction and release is repeated.)
When in MANUAL mode, ON/OFF is operated by the push button.

Switch
New!
All new Contact-Less power control units.
Elimates chance of relay failure.


New!
Battery life improved by 40% per day at maximum setting.

New!
Longer battery life provides longer service time between charging especially for high frequency use.

For all models, easy battery replacement is made at the back of the LME units making continuation or re-start of work fast.

Easy battery replacement and quick start of working.
Spare battery is supplied as a standard included accessory, for all models.
Recharge and replace with charged spare battery for quick change.

Remarks:
When Alarm repeatedly sounds, this indicates battery life is depleting.
Replace with fully re-charged spare battery.


*Battery for the LME-10F and 10FJ, are the same batteries used on motor-bikes.


[mm(in)]
Model Lifting
Capacity
Dimensions Battery
Cap.
Working
Hours
(50%ED)
Mass Accessories
Width Length Height
LME-10F 1000kg/2205lb 220(8.66) 300(11.8) 428(16.9) 12V 12Ah Max.8h 60kg/132.3lb Spare battery 1set
Charger 1set
LME-17F 1700kg/3748lb 263(10.4) 380(15.0) 494(19.4) 12V 28Ah 130kg/286.6lb
LME-30F 3000kg/6614lb 490(19.3) 539(21.2) Max.7h 180kg/396.8lb
LME-10FJ 1000kg/2205lb 220(8.66) 300(11.8) 461(18.1)-472(18.6) 12V 12Ah Max.8h 65kg/143.3lb
LME-17FJ 1700kg/3748lb 263(10.4) 380(15.0) 541(21.3)-552(21.7) 12V 28Ah 140kg/308.6lb
LME-30FJ 3000kg/6614lb 490(19.3) 586(23.1)-597(23.5) Max.7h 190kg/418.9lb
*The lifting capacity is indicated by a value that is a half of the maximum holding power.
*The working rate is 50%ED(power on 5min. and pause 5min.).

Steel plate lifting standard (Mill scale soft steel plate) [mm(in)]

Model

Work
Thickness

LME-10F,10FJ LME-17F,17FJ LME-30F,30FJ
Square X500 X1000 Square X1000 X2000 Square X1000 X2000
6 550(21.7) 600(23.6) 300(11.8) 1300(51.2) 1600(63.0) 800(31.5) 1400(55.1) 1800(70.9) 900(35.4)
9 650(25.6) 800(31.5) 400(15.7) 1650(65.0) 2500(98.4) 1200(47.2)
12 1500(59.1) 2200(86.6) 1100(43.3) 1750(68.9) 2700(106.3) 1300(51.2)
16 800(31.5) 1100(43.3) 600(23.6) 1700(66.9) 2800(110.2) 1400(55.1) 1800(70.9) 3000(118.1) 1600(63.0)
20 900(35.4) 1400(55.1) 850(33.5)
25 1100(43.3) 2000(78.7) 1200(47.2) 1850(72.8) 3300(129.9) 1700(66.9)
30 1000(39.4) 1800(70.9) 1000(39.4) 1600(63.0) 2500(98.4) 1300(51.2)
40 950(37.4) 1600(63.0) 900(35.4) 1500(59.1) 2300(90.6) 1200(47.2) 1750(68.9) 3000(118.1) 1500(59.1)
50 800(31.5) 1200(47.2) 600(23.6) 1300(51.2) 1700(66.9) 800(31.5) 1700(66.9) 2700(106.3) 1400(55.1)
100 550(21.7) 600(23.6) 300(11.8) 900(35.4) 850(33.5) 450(17.7) 1200(47.2) 1500(59.1) 700(27.6)

Section steel lifting standard [mm(in)]

Work

Model

Angle Steel I or H-shaped Steel Channel Steel
Type Length Type Length Type Length
LME-10F,10FJ 75(2.95)x75(2.95)xt9(0.35) 2000
(78.7)
100(3.93)x75(2.95) 2500
(98.4)
100(3.93)x50(1.96) 2000
(78.7)
100(3.93)x100(3.93)xt10(0.39) 150(5.90)x75(2.95) 150(5.90)x75(2.95)
150(5.90)x150(5.90)xt15(0.59) 200(7.87)x150(5.90) 200(7.87)x80(3.15)
200(7.87)x200(7.87)xt20(0.78) 300(11.8)x150(5.90) 300(11.8)x90(3.54)
LME-17F,17FJ 75(2.95)x75(2.95)xt9(0.35) 3000
(118)
100(3.93)x75(2.95) 4000
(157)
100(3.93)x50(1.96) 3000
(118)
100(3.93)x100(3.93)xt10(0.39) 150(5.90)x75(2.95) 150(5.90)x75(2.95)
150(5.90)x150(5.90)xt15(0.59) 200(7.87)x150(5.90) 200(7.87)x80(3.15)
200(7.87)x200(7.87)xt20(0.78) 300(11.8)x150(5.90) 300(11.8)x90(3.54)
LME-30F,30FJ 75(2.95)x75(2.95)xt9(0.35) 5000
(196)
100(3.93)x75(2.95) 6000
(236)
100(3.93)x50(1.96) 5000
(196)
100(3.93)x100(3.93)xt10(0.39) 150(5.90)x75(2.95) 150(5.90)x75(2.95)
150(5.90)x150(5.90)xt15(0.59) 200(7.87)x150(5.90) 200(7.87)x80(3.15)
200(7.87)x200(7.87)xt20(0.78) 300(11.8)x150(5.90) 300(11.8)x90(3.54)