Simple type

ME-N2A
|
Standard type

ME-2CA |
Fluorescent
lamp type

ME-F1C |
Tall type

ME-L2C
[Application]
The magnetic lamp stands allow the magnet to be turned on and off quickly,
and thus can easily be installed in any place, removed and relocated. These
stands are most suitable for lighting work areas on work tables or machine
tools.
Small and compact, but the strong magnetic holding power enables this stand
to be installed not only on a horizontal surface, but on an inclined surface
easily. The flexible tube offers freely selectable lighting angles.
[Features]
- While the installation position is fixed by the attractive face, an illuminating
direction can be changed as desired.
- The protective guard protects the bulb from breakage if the stand falls.
- The employment of an oil-resistant power cord allows these stands to be
used on various work sites.

A bulb is not included .Use a bulb of base E26.
|
 |
[mm(in)] |
Model |
Type |
Holding
Power |
Height |
Cord
Length |
Bulb
Capacity |
Mass |
ME-N2A |
Simple type |
300N
(30kgf) |
460
(18.1) |
1.6m
(62.9) |
100 VAC
Upper limit 100W,
optimum 60W |
1.2kg
/2.6lb |
ME-2CA |
Standard type |
800N
(80kgf) |
440
(17.3) |
1.6kg
/3.5lb |
ME-L2C |
Tall Type |
1000N
(100kgf) |
704
(27.7) |
2.2kg
/4.8lb |
ME-F1C |
Fluorescent lamp type |
440
(17.3) |
2.0kg
/4.4lb |
※When using a stand with a 100W incandescent lamp for long hours,
rating-related problems will not arise, but caution must be taken against
overheatingwhen handing it.
※Depending on the dimensions of bulb type fluorescent lamps, they may be
usedon ME-2CA.
※The holding power is based on a test piece of SS400, 10 mm thick, ground
surface.
※The power plug is of tracking resistance type. |
|