| Software name |
TM-801Pro [Communication software for Tesla Meter TM-801] |
| Version |
1.1A |
| Copyright owner |
Kanetec Co., Ltd. |
| Operating environment |
Operation confirmed on Windows XP/7/8/10 (32/64 bits),Excel 2007 and later version, USB 2.0 |
| Others |
USB cable (A male - mini B male) to be provided by the user |
|
This software cannot be used with TM-701/601.
Connection of a Tesla meter to equipment other than a PC is not supported.
The number of Tesla meters that can be connected to one PC is one unit.
|
1. Features
- Data acquired by a Tesla meter can be sent to a PC and saved in the CSV format.
- Measured values can be judged OK or NG.
- Two modes; trigger measurement and automatic measurement are available.
- Since the Tesla meter is powered via the USB port of the PC, there is no need to worry about the battery.
2. Installation
Log on by the administrator authority to start installation.
Prior to starting installation, check to see if the USB driver and TM-801Pro have been installed. If so, uninstall them.
Do not connect TM-801.
- Unzip "tm801pro_v110a.zip" in suitable folder.
"tm801pro" folder will be created in the "tm801pro_v110a" folder.
- The driver to install differs depending on the OS. Perform the procedure described below according to your OS.
(WindowsXP/7/8)
Execute "cp210x_vcp_win_xp_ s2k3_vista_7.exe" in the "tm801pro/usb driver/win8" folder and install the USB driver.
(Windows10)
Unzip "CP210x_Universal_Windows_Driver.zip" in "tm801pro/usb driver/win10" folder and execute the following file to install the USB driver:
CP210xVCPInstaller_x64.exe (64-bit version)
CP210xVCPInstaller_x86.exe (32-bit version)
-
After installing the USB driver, execute "setup.exe" in the "tm801pro" folder and install according to the instructions.
When "TM-801pro" has been displayed in "Control Panel" - "Add or Remove Programs"(Programs and Features), the installation has been completed.
|
